Negotiable
The date of payment from buyers deliver within days
Hubei
Long-term effective
2020-10-13 19:52
345
Company Profile
Huangshi Xingfa Technology Co.,Ltd.By certification [File Integrity]
Contact:xf2018(Mr.)
Email:
Telephone:
Phone:
Area:Hubei
Address:Hubei
Website:http://www.xingfa-bathfitting.com/ http://xf2018.021msby.com/
Product Advantages
Long Life Cycle: We use magnet to turn valve on and off, there is much less friction so that the service life is more than 5-10 times the traditional valve. That is why we offer longer warranty than our competitors, you get 5 years warranty, anything broken in 5 years = brand new cartridge.
Leak Free: It uses the static sealing mode, while traditional mechanic valve use dynamic sealing. Magnetic valve uses the non-contact full sealing cylinder as the main body, which isolate the internal water flow from the external driving part.
Maintenance-Free: Our valve is made of PPS, one of the best anti-corrosion material. You only need to replace the valve spool when something happens. You will save great amount of maintenance costs.
Light Switch : No matter how high the water pressure is, children, the elderly or disabled can turn it on easily because magnet will help them turn on the valve.
Easy to install: With our instruction, young kids can assemble our product in less than 5 min.
8-00-004-02 Type Ⅱ on off cartridge
Specification |
DN15 |
||||
Use parameters | |||||
Maximum operating temperature |
90℃ |
Opening pressure |
≤7N |
||
Switch trip |
5mm |
Clamp nut torque |
3±0.5N.m |
||
Performance test | |||||
Strength test |
Static pressure 2.5MPa |
Average flow |
≥0.20L/s (0.1 Mpa) |
||
Pressure range |
0.05MPa-0.75MPa |
Delay time |
NO |
||
Seal test |
High pressure |
0.75MPa |
|||
Low pressure |
0.05MPa |
||||
Service life |
500,000 times |
||||
In & out term |
Side in and bottom out |
||||
Main material |
PPS、EPDM、NBR |
Precautions for
TypeⅢ on off
cartridge test 8-00-004-03A /8-00-004-03B
Serial number |
Item |
Parameter |
Description |
Precautions |
1 |
Proper temperature |
4~90° |
Cartridges can only be tested and used within this temperature range |
Exceeding applicable temperature range may cause cartridge function failure |
2 |
Thread locking torque |
2.5±0.5 N.m |
Thread locking torque control is most suitable in the range of (2.5 ± 0.5) N.m |
The tightening nut torque exceeds the specified range. Too small may cause water leakage and too large may damage the cartridge. |
3 |
Button stroke |
4.2mm |
button stroke 9mm |
During the life test, the maximum stroke of the compression must be reserved from 0.2 to 0.4mm to avoid excessive force of the cylinder and long-term reciprocating operation, which may damage the cartridge parts. |
4 |
Pressing force |
≤7N |
Maximum 7N force is required to open the cartridge |
The pressing force of any test should not exceed 50N. Excessive force and long-term reciprocating operation may damage the cartridge parts. |
5 |
Pressure range |
0.05~0.75Mpa |
The cartridge is within the pressure range of 0.05 ~ 0.75Mpa, various functions are normal, such as normal opening, closing without leakage, etc. |
Do not exceed the pressure range to test the performance of the cartridge, otherwise the failure of over-high-pressure opening or over-low-pressure sealing and inadequate dripping may occur. |
6 |
Strength test |
2.5Mpa |
The cartridge is installed in the valve body and in a closed state, it is slowly pressurized to 2.5Mpa at the water inlet, maintaining (60 ± 5) S. The cartridge could not appear the permanent deformation and rupture; 0.05 ~ 0.75Mpa), all functions of the cartridge are normal. |
For individual customers that exceed the strength test requirements of this standard, they need to repeat new testing and validation. |
7 |
Instantaneous flow |
≥0.2L/S (0.1Mpa) |
When the water pressure is 0.1Mpa, press the button (0.5 ~ 1S) to open the cartridge, the instantaneous flow rate recorded is ≥0.2L/S .
|
In order to ensure that the measured instantaneous flow rate is accurate, the diameter of the inlet pipe must be a pipe with a diameter of DN15mm or more. |
8 |
Delay time |
NONE |
Why us?
We are the very 1st. manufacturer who applied magnetism into valve in domestic China.Our new magnetic water-saving valve is leak-free,non-friction,long-life cycle and easy to install.
Product Advantages
Long Life Cycle: We use magnet to turn valve on and off, there is much less friction so that the service life is more than 5-10 times the traditional valve. That is why we offer longer warranty than our competitors, you get 5 years warranty, anything broken in 5 years = brand new cartridge.
Leak Free: It uses the static sealing mode, while traditional mechanic valve use dynamic sealing. Magnetic valve uses the non-contact full sealing cylinder as the main body, which isolate the internal water flow from the external driving part.
Maintenance-Free: Our valve is made of PPS, one of the best anti-corrosion material. You only need to replace the valve spool when something happens. You will save great amount of maintenance costs.
Light Switch : No matter how high the water pressure is, children, the elderly or disabled can turn it on easily because magnet will help them turn on the valve.
Easy to install: With our instruction, young kids can assemble our product in less than 5 min.
Company Information
How to visit Xingfa?
Packaging & Shipping
FAQ
Q:Are you trading company or manufacturer ?
A: We do not produce any products directly, but we have assemble production line.
Our cooperated factories produce all faucet accessories and then we combine them in our company. We have our own R&D team.
Q: Payment term?
A: T/T 30% in advance,70% balance before delivery
http://www.xingfa-bathfitting.com/